Sunaimer More than dubble the effekt on your sunpanel!
 
 

Sunaimer SA-1 on boat.

On sailboats SA-1 can always stay mounted. On speedboats it may be appropriate to dismantle Sunaimer while driving. This can easily be done with an M6 bolt and takes a minute.

Mounting
In the stern of the boat mount a 45 mm stainless steel tube horizontally. Suitable height can be about 2 meters high.

The pipe is fastened against the railing with two adapted flat irons and two 50 mm stainless steel hangers. On top of the tube a second tube is threaded on the 2-meter tube. This tube fits the steel tube and can rotate. This tube is provided with a lock handle.

The point of this is that you can turn Sunaimer north-south. See manual.

Sunaimer is mounted on the rotatable tube. The cabling is drawn through the tube. Sunaimer has a connector to the 12 volts. Make sure that the panel is provided with a connector also. Then one can easily remove the solar panel, if necessary

 

akter

  stolpe solpanel.